Transferring dry bulk materials using bulk conveyors

DT II is a combination of TD75 and DX series (i.e. general type and high-strength type), which can be divided into three types according to bearing capacity: light, medium and heavy. The complete conveying sustem is suposed to be designed by single or multi units. It can convey various bulk materials with a bulk density of 500-2

Featured Products


DT II is a combination of TD75 and DX series (i.e. general type and high-strength type), which can be divided into three types according to bearing capacity: light, medium and heavy. The complete conveying sustem is suposed to be designed by single or multi units. It can convey various bulk materials with a bulk density of 500-2500kg / m3. The applicable ambient temperature is - 25 ºC ~ + 40 ºC.  For the belt conveyor working in special environment, the conveyor belt is required to be heat resistance, cold resistance, water resistance, corrosion protection, explosion-proof, flame-retardant, etc., meanwhile the corresponding protective measures shall be taken separately. This series of belt conveyor is designed according to the parts, which has high universality.
SKE can carry out the free detailed design of the conveyor according to the flow diagram provided by the customer, and provide the calculation sheet, general drawing, parts list, foundation size, foundation load and other data to the customer and the Design Institute in a short period, or carry out the design after the data is inspected on site.
Transloading Dry Bulk Material by Using Bulk Handling Conveyors




Features

1)A wide range of conveying materials
2)Wide range of conveying capacity
3)Strong adaptability of conveying line
4)Flexible loading and unloading
5)Strong reliability
6)Low maintenance costs
7)Strong reliability
8)High safety

Transloading Dry Bulk Material by Using Bulk Handling Conveyors


Technical Specifications

Transloading Dry Bulk Material by Using Bulk Handling Conveyors


Note: 
1. The delivery capacity ( IV ) is calculated according to the attribute transportation when the dynamic stacking angle is 20 ° and the idler groove angle is 35 °
2. The belt speed (4.5) and (5.6) m / s in the table are non-standard values, which are generally not recommended.

SKE Capacity of Belt Conveyors
Transloading Dry Bulk Material by Using Bulk Handling Conveyors

Manufacturing of Belt Conveyors
Transloading Dry Bulk Material by Using Bulk Handling Conveyors

FAQs:

Q:  How long is the the gurantee period?
A:  It is 12 months One year warranty, but not including the wear-parts like rollers, idlers etc.

Q: How do you ship the product?
A: It is usually shipped by sea-feight, using containers;

Q: Can your company design the full conveyor system?
A: Yes, but we need detail of the project, as well as the topographic map;

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours