flux cored welding wire
wear plate welding wire
Wodon self gas shielding flux cored welding wire for wear resistant welding plate
Wodon develop our wear resistant flux cored welding wires always according to plate's characteristics. This gurantee good performance regarding no clearing slag, low welding spatter, smooth surface, high welding efficiency and a transition coefficient above 0.9.
Our output is around 1500 tons of wear plate welding wires per year, positioning ourselves as one of the main players on the domestic market. Our stable quality and good service result in increasing domestic and export sales year by year.
|Model||Spec. (mm)||Hardness (HRC)|| Main Ingredient |
|Application and Characteristics|
|HD161||2.4, 2.8, 3.2||58~65||C: 3.0~5.0 Cr: 22~27||Used in wear-resistant plate single-layer hardfacing, hardness after welding up to HRC 60|
|HD261||57~63||C: 3.0~5.0 Cr: 22~27||Used in wear-resistant plate double-layer hardfacing, hardness after welding up to HRC 60, good impact resistance and no easy to fall off|
|HD361||57~63||C: 3.0~5.0 Cr: 24~30||Used in wear-resistant plate multi-layer hardfacing, hardness after welding up to HRC 60, good impact resistance and no easy to fall off|
|HD181||58~65||C: 3.0~5.0 Cr: 22~27||Used in thin sheet welding, hardness up to HRC 60 after welding actual thickness less than 3.0 mm, ensures good abrasion|
|HD161H||58~65||C: 3.0~5.0 Cr: 25~32||Deposited metal has high chromium cntent after welding, good abrasion. Used in single-layer hardfacing.|
We are certified with the ISO9001:2008 and keep continuously improving our quality management system. We have strict procedures for raw materials, products inspection, production process, storage management and after sales service.
We are certified with the ISO1400:2004 and keep continuously improving our environmental management system. We use the electric boiler not the coal fired boiler to protect the environmental. We use the advanced dust removal and ventilation equipment to keep the air clean.
We are certified with the OHSAS18001-2007 and keep continuously improving our occupational health and safety management system. Our every technical staff wears filter mask, protective clothing and gloves and welding goggles.
We have our own Quality Inspection Technology Department and the team are made of many experience exports with material science bachelor-degree and the leaders with material science master-degree. In the pictures you can also see our equipment in our laboratory. Our inspection team make regular testing on raw material, production process and our products according our company's strict policy.
In our Laboratory there are the Rockwell Hardness tester to test the Hardness of the small welding samples, the portable Spectrum to test the chemical compostion easily at the work pieces on the scene, the portable Hardness tester to test the Hardness easily at the work pieces on the scene and the portable ultrasonic thickness measurement instrument to test the thickness easily and accurate.
There are also abrasion resistance testing machine and a series of metallograhy experiment instruments, so the metallurgical microstructure and wear resistance can be tested.
The below picture shows our laboratory. There are many equipments to suppert our Quality Inspection Technology Department, for sample: a series of metallographic analysis equipments, protable spectrum, protable ultrasonic thickness tester, protable ultrasonic hardness tester, destop Rockwell hardness tester, Infrared carbon sulfur analyzer, Quartz sand rubber wheel abrasion test machine and Reciprocating abrasion tester.
Packaging: Steel pallet, Non fumigation pallets, Plastic Film, Customized
Packaging Size: 1.4*3.4 m, 1.5*3 m, 2*3 m, 1.4*.3.0 m, 1.4*3.5 m, 2.1*3.5 m, customized.
Delivery Detail: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Loading into 20 ft or 40 ft container.
Q: Are you trading company or manufacturer ?
A: We are manufacturer with 4 factorys, our own sales department and our own inspection technology department.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge.
Q: What is your terms of payment ?
A:30% T/T in advance ,balance against copy of BL.
also, FOB, CIF, CFR all are available for your product.
If you have another question, pls feel free to contact us as below: