flux cored welding wire
hardfacing wire for build up repairing
1. Type: flux cored welding wire for hardfacing/surface welding/cladding
2. Diameter: 1.2 mm, 1.6 mm, customized.
3. Standard: GB
4. Certification: ISO9001:2008, ISO14001:2004, OHSAA 18001-2007
| Model | Diameter [mm] | Hardness [HRC] | Main Chemical [%] | Main application and characteristics |
| D688 | 1,2;1,6 | 50-58 | C: 2.5-5.0 Cr: 22.5-27.5 | Apply to a serious part of grinding wear surfacing, multi-layer welding. Surfacing layer thickness can be up 50 mm |
| D788 | 1,2;1,6 | 50-60 | C: 3.0-4.5 Cr: 24-30 | Apply to a serious part of grinding wear surfacing welding, welding layer thickness control under 20 mm |
| D888 | 1,2;1,6 | 58-65 | C: 3.5-4.5 Cr: 24-27.5 | Apply to a serious parts of abrasive wear surfacing welding, welding layer thickness control under 10 mm |
| D788A | 1,2;1,6 | 50-60 | C: 3.0-4.5 Cr: 20-25 | Apply to a serious parts of abrasive wear surfacing, limited to single layer welding. |
| D788M | 1,2;1,6 | 60-66 | C: 3.0-4.5 Cr: 24-30 | Apply to a serious parts of abrasive wear surfacing |
| D688 Welding Rod | 4.0 | 50-58 | C: 2.5-5.0 Cr: 22.5-27.5 | Suitable for severe abrasive wear parts hardfacing welding, surfacing layer thickness control under 20 mm |
We are certified with the ISO9001:2008 and keep continuously improving our quality management system. We have strict procedures for raw materials, products inspection, production process, storage management and after sales service.
We are certified with the ISO1400:2004 and keep continuously improving our environmental management system. We use the electric boiler not the coal fired boiler to protect the environmental. We use the advanced dust removal and ventilation equipment to keep the air clean.
We are certified with the OHSAS18001-2007 and keep continuously improving our occupational health and safety management system. Our every technical staff wears filter mask, protective clothing and gloves and welding goggles.
We have our own Quality Inspection Technology Department and the team are made of many experience exports with material science bachelor-degree and the leaders with material science master-degree. In the pictures you can also see our equipment in our laboratory. Our inspection team make regular testing on raw material, production process and our products according our company's strict policy.
In our Laboratory there are the Rockwell Hardness tester to test the Hardness of the small welding samples, the portable Spectrum to test the chemical compostion easily at the work pieces on the scene, the portable Hardness tester to test the Hardness easily at the work pieces on the scene and the portable ultrasonic thickness measurement instrument to test the thickness easily and accurate.
There are also abrasion resistance testing machine and a series of metallograhy experiment instruments, so the metallurgical microstructure and wear resistance can be tested.
The below picture shows our laboratory. There are many equipments to suppert our Quality Inspection Technology Department, for sample: a series of metallographic analysis equipments, protable spectrum, protable ultrasonic thickness tester, protable ultrasonic hardness tester, destop Rockwell hardness tester, Infrared carbon sulfur analyzer, Quartz sand rubber wheel abrasion test machine and Reciprocating abrasion tester.
Packaging: Steel pallet, Non fumigation pallets, Plastic Film, Customized
Packaging Size: 1.4*3.4 m, 1.5*3 m, 2*3 m, 1.4*.3.0 m, 1.4*3.5 m, 2.1*3.5 m, customized.
Delivery Detail: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Loading into 20 ft or 40 ft container.
Q: Are you trading company or manufacturer ?
A: We are manufacturer with 4 factorys, our own sales department and our own inspection technology department.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge.
Q: What is your terms of payment ?
A:30% T/T in advance ,balance against copy of BL.
also, FOB, CIF, CFR all are available for your product.
If you have another question, pls feel free to contact us as below: