Gas shielded welding wire for hard surface

Wodon factory  wear resistant flux cored welding wire for hard facing factory hot rollerWodon develop our wear resistant flux cored welding wires always according to plate\'s characteristics. This gurantee good performance regarding no clearing slag, low welding spatter, smooth surface, high welding efficiency and a tr

Featured Products

Gas Shielded Welding Wire for Hard Facing
Gas Shielded Welding Wire for Hard Facing
Wodon factory  wear resistant flux cored welding wire for hard facing factory hot roller

Wodon develop our wear resistant flux cored welding wires always according to plate's characteristics. This gurantee good performance regarding no clearing slag, low welding spatter, smooth surface, high welding efficiency and a transition coefficient above 0.9.

Our output is around 1500 tons of wear plate welding wires per year, positioning ourselves as one of the main players on the domestic market. Our stable quality and good service result in increasing domestic and export sales year by year.

Gas Shielded Welding Wire for Hard Facing
 
ModelSpec. (mm)Hardness (HRC) Main Ingredient 
(%)
Application and Characteristics
HD1612.4, 2.8, 3.258~65 C: 3.0~5.0 Cr: 22~27Used in wear-resistant plate single-layer hardfacing, hardness after welding up to HRC 60
HD26157~63 C: 3.0~5.0 Cr: 22~27Used in wear-resistant plate double-layer hardfacing, hardness after welding up to HRC 60, good impact resistance and no easy to fall off
HD36157~63 C: 3.0~5.0 Cr: 24~30Used in wear-resistant plate multi-layer hardfacing, hardness after welding up to HRC 60, good impact resistance and no easy to fall off
HD18158~65 C: 3.0~5.0 Cr: 22~27Used in thin sheet welding, hardness up to HRC 60 after welding actual thickness less than 3.0 mm, ensures good abrasion
HD161H58~65 C: 3.0~5.0 Cr: 25~32Deposited metal has high chromium cntent after welding, good abrasion. Used in single-layer hardfacing.
 

Wodon produces more than 100 kinds of flux cored welding wires

Products

Details

Wear plate welding wire

Single-layer hardfacing welding wire, double-layer hardfacing welding wire and multi-layer hardfacing wire

Welding wire for repairing

Coal grinding roller hardfacing welding wire; cement Vertical mill hardfacing welding wire; Squeeze roller hardfacing welding wire; Repairing welding wire for steel slag grinding roller; Repairing welding wire for star wheel and other repairing welding wire

Gas shielding welding wire

All kinds of gas shielding repairing welding wires (repair all kinds of wear resistant parts), heat resistant welding wire, grate bar and single tooth roller repairing welding wire, impact resistant welding wire and various welding wires containing special elements (which can be customized as required)

Instruction

1.      Smooth wire feeding, stable arc, uniform diameter

2.      Less spatter and smoke during welding, above 90% hardfacing efficiency

3.      Every drum (spool) packed with one whole PC of welding wires, without any joint, no broken arc phenomena during the welding to improve production efficiency

4.      Developing more than 100 kinds of flux cored wear resistant welding wire suited to metal wear resistant field which can satisfy the wear resistant requirements of many wear resistant parts under all kinds of working conditions

5.      The base metal and the wear resistant overlay are metallurgical bonding; After welding, the wear resistant layer doesn't fall off because of uniform stress relief.

We can provide qualification certificate, product data sheet, test report including chemical composition, hardness, etc of wear resistant overlay

Gas Shielded Welding Wire for Hard Facing

We developed our own flux cored welding wire with customized ingredient for all kinds of working conditions. Our welding wires has following advantages:

1. smooth wire feeding, stable arc , uniform diameter

2. less patter and smoke during welding, above 90% hardfacing efficiency

3. every drum packed with one whole PC of welding wires, without any joint, no broken arc phenomena during the welding to improve production efficiency

4. developing more than 100 kinds of flux cored wear resistant requirements of many wear resistant field which can satify the wear resistant requirements of many wear resistant parts under all kinds of working conditions.

5. the base metal and the wear resistant overlay are metallurgical bonding; after welding, the wear resistant layer doesn't fall off because of uniform stress relief.

We can provide qualification certificate, product data sheet, test report including chemical compostion, hardness, etc of wear resistant overlay.

flux cored welding wire
Gas Shielded Welding Wire for Hard Facing

Wodon abrasion resistant flux core welding wire

High temperature resistant welding wire



Gas Shielded Welding Wire for Hard Facing
Our flux core welding wire with 1.2 mm, 1.6 mm 2.8 mm can be packed in 50 kg/Coil with waterpoof packing and Desiccant, or packed in 15 kg/Coil with vacuum packing. The Quality guarantee period are over one year in the dry condition. In our Coils are no Joint, so that during the welding process will be no current interruption to break the welding process.
Abrasion resistant flux core wire
Our flux core welding wire with diameter 2.8 mm, 3.2 mm or 4.0 mm can be packed 100~250 kg/Drum without a joint.We guarantee good performance regarding no cleaning slag, low welding spatter, smooth surface, high welding efficiency and a transistion coefficient above 0.9.

We are certified with the ISO9001:2008 and keep continuously improving our quality management system. We have strict procedures for raw materials, products inspection, production process, storage management and after sales service.
We are certified with the ISO1400:2004 and keep continuously improving our environmental management system. We use the electric boiler not the coal fired boiler to protect the environmental. We use the advanced dust removal and ventilation equipment to keep the air clean.
We are certified with the OHSAS18001-2007 and keep continuously improving our occupational health and safety management system. Our every technical staff wears filter mask, protective clothing and gloves and welding goggles.
We have our own Quality Inspection Technology Department and the team are made of many experience exports with material science bachelor-degree and the leaders with material science master-degree. In the pictures you can also see our equipment in our laboratory. Our inspection team make regular testing on raw material, production process and our products according our company's strict policy.
In our Laboratory there are the Rockwell Hardness tester to test the Hardness of the small welding samples, the portable Spectrum to test the chemical compostion easily at the work pieces on the scene, the portable Hardness tester to test the Hardness easily at the work pieces on the scene and the portable ultrasonic thickness measurement instrument to test the thickness easily and accurate.
There are also abrasion resistance testing machine and a series of metallograhy experiment instruments, so the metallurgical microstructure and wear resistance can be tested.
The below picture shows our laboratory. There are many equipments to suppert our Quality Inspection Technology Department, for sample: a series of metallographic analysis equipments, protable spectrum, protable ultrasonic thickness tester, protable ultrasonic hardness tester, destop Rockwell hardness tester, Infrared carbon sulfur analyzer, Quartz sand rubber wheel abrasion test machine and Reciprocating abrasion tester.


Tianjin Wodon Wear Resistant Material Co., Ltd is located in Tianjin city, China's northern international shipping center. We are specialized in researching, developing and producing wear resistant products with many years experience in this field. We have more than 300 employees, with an annual output of 140000 squaremeters of wear plates and 9000 tons of welding consumables.

Packaging: Steel pallet, Non fumigation pallets, Plastic Film, Customized
Packaging Size: 1.4*3.4 m, 1.5*3 m, 2*3 m, 1.4*.3.0 m, 1.4*3.5 m, 2.1*3.5 m, customized.
Delivery Detail: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Loading into 20 ft or 40 ft container.

Q: Are you trading company or manufacturer ?
A: We are manufacturer with 4 factorys, our own sales department and our own inspection technology department.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge.
Q: What is your terms of payment ?
A:30% T/T in advance ,balance against copy of BL. 

Gas Shielded Welding Wire for Hard Facing




    


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours