Brazed wear plate combined with wear plate bimetal wear plate

Brazing wear plates Joint wear Plate Be-metallic Wear Plate For Bucket Protection>Material,ASTM A532 15/3 CrMo white iron casting , chemical composition ( percentage )CCrMoSiMnNiCuPS2.0-3.314-18≤ 3.0≤ 1.5≤ 2.0≤ 2.5≤ 1.2≤ 0.1≤ 0.06 Q235 mild steel backing , chemical co

Featured Products

Brazing wear plates Joint wear Plate Be-metallic Wear Plate For Bucket Protection


>Material,
ASTM A532 15/3 CrMo white iron casting , chemical composition ( percentage )


C

Cr

Mo

Si

Mn

Ni

Cu

P

S

2.0-3.3

14-18

≤ 3.0
≤ 1.5≤ 2.0≤ 2.5≤ 1.2≤ 0.1≤ 0.06


 
Q235 mild steel backing , chemical composition ( percentage )


C

Si

Mn

P

S

Cr

Ni

Mo

Cu

0.2

0.35

1.4

0.045

0.05

0.3

0.3

0.3

0.3


 

Applications---Typical applications include the following for the Surge, Mining, Steel, Re-cycling, OEM, Aggregate and other Heavy Industries (to name only a few of the countless applications):

Chute Linings            Ore Chutes              Crusher Chutes                 Coal Transfer Chutes
Tripper Chutes           Flop Gates               Surge Bin Liners               Bucket Liners
Rock Box Liners         Skip Liners               Trough Liners                   Apron Feeder Liners
Draglines                     Shovels                     Screen Plates                   Loaders
Wear Aprons               Concentration Bins  Reclaimer                         Buckets
Loading Pocket Liners Transition Pieces      Conveyor Transfer Points
Bolt Protectors Grizzly Bars Rock Box Edges
Hopper Edges Lip Protectors Adaptor Protectors
Deflector Plates Splitter/Divider Plates Wear Pads
Fan Blades Jaw Crushers Hammer Mill Inserts
Knife Inserts Crusher Bars Rolling Mill Guides
Run Out Rolls Dump Hoppers Crusher Hoppers
Floor Liners Arm & Hub Liners Truck Bed Liners
Bucket Liners Impact Wall Liners Distribution Plates
Elastomer Bonded Liners (Noise Reduction) Vibratory Feeders
Hopper (Receiving & Discharge) Liners Bucket Wheel Protection

Wear Plates

Available in a wide range of sizes, Hyster wear Plates can be used in a combination of our standard sizes to create optimum layouts that provide the greatest impact and wear protection.

Suitable for use in chutes, hoppers, bins, liners, impact walls, rock boxes and a variety of other applications.

Very easy to use, no pre or post heating when welding.

Standard Wear Plates (mm)
TypeItem No.SizeDimension(mm)N.W.
(kg)
mmABCDE
Standard WP 200-18 200x200x18 200200126185.7
WP 200-20 200x200x20 200200146206.3
WP 300A 300x150x20 300150146207
WP 250 250x250x20 250250146209.8
WP 300C 300x300x18 3003001261812.7
WP 300B 300x300x20 3003001462014.1
WP 305 305x150x24 305150186248.6
WP 300C 300x150x25 300150196258.8
WP 300D 300x300x25 3003001962517.7
WP 445 445x445x25 4454451962538.9
WP 301 301x200x28 30120018102813.2
WP 294A 294x144x30 29414420103010.2
WP 294B 294x294x30 29429420103020.4
WP 300E 300x150x30 30015020103010.6
WP 300F 300x300x30 30030020103021.2
WP 372 372x372x28 3723722082830.4
WP 300G 300x300x50 30030040105035.3
WP 300H 300x148x50 30014840105017.4
WP 206 206x203x58 20620338205819
Trapezoidal WPt 190 190x212.5x25 190213178257.9
WPt 241 241x290.5x30 2412912283019.5
For laminate bi-metallic wear plate, the biggest size we can make is 900x600mm, do not need to be joint

Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
  1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
  2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
  3) Shaped wear bars
  4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
  5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
  6) Bi-metallic wear plates
  7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
  8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
  9) Wafer strips, WS25, WS40, WS50, WS65;
 10) Elbow wear blocks
 11) Other sizes and shapes
 12) Multi-function gradient cutter tooth
 13) Rockbox liners
 14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours