Bimetal wear-resistant vibrating screen

Wear Plate with High Chromium Carbide Overlay Screens1. General DescriptionChromium carbide composite cladding fusion bonded to a mild steel backing material.The deposit has been realized by means of oscillated welding and a wear resistant coating applied by submerged arc welding.Fine cracks perpend

Featured Products

Wear Plate with High Chromium Carbide Overlay Screens


1. General Description
    • Chromium carbide composite cladding fusion bonded to a mild steel backing material.
    • The deposit has been realized by means of oscillated welding and a wear resistant coating applied by submerged arc welding.
    • Fine cracks perpendicular to the welding bead is normal due to natural stress relieving in a very hard matrix.
    • Very high volume of chromium carbides evenly distributed throughout the uniform thickness of the deposit.
    • Plate hardness ranges from HRC58-65.
    Bimetallic Wear Resistant Vibrating Screen
    Bimetallic Wear Resistant Vibrating Screen
    Bimetallic Wear Resistant Vibrating Screen

     
    2. Application

    Wodonplate Suitable for applications involving high abrasion and low to medium impact.
     
    Typical applications are as follows:
     
    1. Bin and hopper liners
    2. Slurry pipes and bends
    3. Chute and feeders liners 
    4. Belt conveyors
    5. Dump truck bodies liner
    6. Mining and earth moving equipment
    7. Mill shell liners 
    8. etc...
    3. Specification
    Thickness(backing plate + weld overlay)L x W (mm)
    4+4, 5+51,400 x 3,000
    6+6, 8+5, 8+6, 8+81,400 x 3,500
    10+8, 10+10, 10+20, 12+12, 12+20, 14+26, 12+32, 20+30..1,400 x 3,500  2,100 x 3,500
     
    CarbonSiliconManganeseChromiumIron
    3.5-6.0%1.0-3.0%1.0-3.0%27-40%Balance
          Note: Carbon and Chromium content varies in different plate thickness.



    4. Fabrication
    The backing mild steel plate provides Wodon brand overlay plates with structural integrity, which makes our overlay plates fabricated with zero damage to welding overlay, regardless of the shape and complexity of the structure. Wodon has the capabilities to manufacture and further process such fabrications or to supply formed, read-to-go wear liners.

     
    • Cutting:  Wodon overlay plates could be cut by plasma, waterjet, laser. Plasma cutting is the recommended method for cutting.                                                   

      Bimetallic Wear Resistant Vibrating Screen
      Bimetallic Wear Resistant Vibrating Screen

                                                         
    • Drilling: Straight holes and countersunk holes                                                                                                                                  Bimetallic Wear Resistant Vibrating Screen
    • Studs Welding: Wodon plate can be fabricated with studs welded to backing of wear plate (M12, M16, M20 and M24)
    • Bimetallic Wear Resistant Vibrating Screen
       
    • Joint Welding: Wodon wear plate can be welded and assembled into kinds of wear parts   
    • Bimetallic Wear Resistant Vibrating Screen
                     
     


    5. More Information:

    Iris Bai
     
     

     

     

    Contact us

    Please feel free to give your inquiry in the form below We will reply you in 24 hours